Deif GC-1F Operator's Manual page 8

GC-1F
Start engine (local (not auto)) running mode.
I:
Stops the engine instantaneously. If the unit is in AUTO mode, the mode will change to
O:
MAN and the engine will stop.
AUTO running mode selector.
AUT:
Manual running mode selector.
MAN:
TEST: Initiates the test sequence selected for the push-button.
: Lamp test. One push will illuminate all LEDs for 3 seconds.
Jumps from parameter settings to display. Removes pop-up messages.
ESC:
: Resets horn relay. Extra function: Press and hold button 2 sec. to see alarm list.
▲: Normal display: Scrolls the display up once. Programming: Increases setpoint value.
▼: Normal display: Scrolls the display down once. Programming: Decreases setpoint value.
: Enters value/acknowledges alarm.
: Breaker closes.
: Breaker opens.
LED functions
Power:
Power OK indicator.
Running feedback
present.
DEIF A/S
Alarm:
Flashing: Active, non-acknowledged alarm(s) present.
Steady: Active, acknowledged alarm(s) present.
ESC
AUT
U/f OK generator.
TEST
Generator breaker
ON.
Operator's Manual
Additional alarm
indication LEDs:
On when the confi-
gured alarm or con-
dition is present (for
more information, see
relay configuration).
ON in AUTO
mode.
ON in manual
mode.
Page 8 of 11