Displaying A Rescue State - Sirona Galileos Getting Started Manual

5 Rescue Management
20
5.1

Displaying a Rescue State

If a rescue state arises, the following message appears when you try
to create a new scan: "Some data has not been transferred yet. Do
you want to continue with the scan anyway?". Click onYes, if you no
longer need the old data and want to take a new patient scan.
The software switches to "Ready for X-ray" (see Section 2.1 on page
7), to continue with the scan. In this case, you can also import the data
at a later stage, see Section 5.3, Case B. If the following message
appears: "The unit is in rescue mode. Please retrieve the scan using
Sirona Control Admin first.", you must follow the procedure described
in Section 5.2.
61 81 155 D 3437
D 3437.202.01.02.02 05.2007