61 81 155 D 3437
D 3437.202.01.02.02 05.2007
To select the desired X-ray component, click on it and then press OK
to confirm.
i
NOTE
The procedure for enabling X-ray acquisition units for single
workstations is described in detail in the "SIDEXIS XG Installation
Instructions".
The software first checks the network connection to see whether the
acquisition unit is communicating correctly before displaying the
Exposure Readiness dialog. You can take an X-ray once the green
flashing LED appears in the dialog to indicate that the unit is ready for
exposure.
2 Creating 3D X-Rays
7