Galileos Reconstruction Monitor; Sidexis Manager - Sirona Galileos Getting Started Manual

3 Sirona Control Server / CBRecoServer
10
3.3

GALILEOS Reconstruction Monitor

The Reconstruction Server can also be started and stopped
separately using the GALILEOS Reconstruction Monitor, which only
runs on the RCU. This is usually not necessary.
i
NOTE
The SCS log files are stored in the following location:
Installation Directory\Sirona\GALILEOS \ Log.
The CBRecoServer log files are stored in the following location:
Installation Directory\Sirona\GALILEOS\CBReco\CBRecoServer\
Log.
3.4

SIDEXIS Manager

If the SCS Monitor is accidentally shut down, restart it using SIDEXIS
Manager and Sirona Control Server.
This link is only available on the RCU where the SCS has been
installed.
61 81 155 D 3437
D 3437.202.01.02.02 05.2007