Terminal; Remote Controller - Eiki EK-350U Owner's Manual

Name and function of the projector

Terminal

① ② ③ ④
⑪ ⑫ ⑬ ⑭
VIDEO IN
①
Connect video output signal to this terminal.
Micro-USB
②
The terminal is to use the USB display function,
when connected the projector to computer with
USB cable
VGA IN 1
③
Connect output signal from computer to this
terminal.
VGA OUT
④
Transmit signals from ③ or ⑤ to other displays
when the projector is acting as a output display.
VGA IN 2 / YPbPr / S-VIDEO
⑤
Connect output signal from computer, YPbPr or
S-Video to this terminal.
HDBaseT
⑥
Connect to this terminal through a network cable
to achieve the HDBaseT function.
HDMI 1
⑦
Connect HDMI digital output signals to this
terminal.
HDMI 2(MHL)
⑧
Connect HDMI digital output signals or MHL
digital output signals to this terminal.
16
⑤ ⑥ ⑦ ⑧ ⑨ ⑩
⑮ ⑯ ⑰
USB
⑨
When using the Memory Viewer function, insert
the USB Flash Drivesy to this terminal directly.
LAN
⑩
Connect network cable to this port for controlling
and operating the projector via network.
AUDIO (L/R)
⑪
Connect audio signals to this terminal.
Kensington Security Slot
⑫
This slot is for a Kensington lock used to deter
theft of the projector.
* Kensington is a registered trademark of ACCO
Brands Corporation
RS232C
⑬
Connect serial cable to this terminal when using
RS232 device to control or operate the projector.
Power cord connector
⑭
AUDIO IN
⑮
Connect audio signals
AUDIO OUT
⑯
Output audio signals to amplifier or other audio
equipment.
Speaker
⑰
Name and function of the projector

Remote controller

*
Laser Transmitting Window:
*
Laser beam will emit from this window while
pressing LASER button during the projection
to use the remote controller as a laser pointer.
Do not stare directly at the laser transmitting
window or aim the window at human body, to
avoid any physical injury.
POWER
Power on or off the projector.
LASER
Press the LASER button during presentation to
use the remote controller as laser pointer.
HDMI
Select HDMI input source.
VGA 1
Select VGA 1 input source.
COMPONENT
Select Component input source.
INPUT
Open or close the INPUT menu.
AUTO
Optimize a computer image automatically
Arrow
–Select items or adjust values in the OSD
menu
–Select display area in digital zoom+ mode.
MENU
Open or close the OSD menu.
VOLUME +
Increase volume.
VOLUME -
Decrease volume.
Mute
Mute the sound.
TIMER
Enable the timer function.
HDMI 2
Select HDMI 2(MHL) input source.
HDBaseT
Select HDBaseT input source.
VGA 2
Select VGA 2 input source.
VIDEO
Select VIDEO input source.
USB-A
Select Memory Viewer input source.
BLANK
Dark out screen images temporarily.
OK
Enter the OSD menu or select options in it.
BACK
Backward or exit the OSD menu.
17