Edge Blending - Eiki EK-350U Owner's Manual

Description on using USB display function
■ When using Mac OS
Mac OS operating environment
OS Mac OS X 10.5, 10.6, 10.7 or newer version
CPU Power PC G4 1GHz or faster
Amount of memory 512 MB or more
Hard-disk free space 20 MB or more
Display Resolution 640 x 480 or more, 1 600 x 1 200 or less
● There is no guarantee for all computers that meet the above conditions will operate properly.
Projecting the USB Display
1. Connect the Micro-USB terminal of the projector to a computer with a USB converting cable.
2. Press the INPUT button on the remote control or Control panel to switch the input source to
USB Display.
● The image on the computer screen is projected.
3. Double-click "Monitor.app" in the virtual disk that has been mounted.
4. Right-click the driver icon in the dock of computer and select one item in Pop-up menu.
● Pop-up menu is only displayed in English.
● The item which is displayed in gray is unavailable.
Active audio/
Set whether to output the audio from the computer.
Disable audio
Play video/
Switch between playing and pausing the image.
Pause video
Start/Stop Set whether to display the image from the computer.
Quit Terminate the USB Display.
Note:

- It will take a while when you want to project the computer screen.
- Connect a USB cable directly to the USB connector of a computer. It will not work when
connecting through a USB hub.
Termination of the USB display
When terminate the USB display, remove the USB cable directly.
68
Description on using Edge Blending function

Edge Blending

Edge Blending function could project bigger and brighter with high resolution pictures via multi
projector. The Edge Blending software could adjust the color and the effect of the overlay edge.
Equipment:
2 or more projector with same resolution, Video duplicator, RS232 series cable.
Connection:
(1) Setting the projectors with the same level from ground and the same projection
distance from screen.
(2)Project the image through the video duplicator to each projecotr.
(3)Connect the computer and projectors via RS232 cable.
Projector#1
Video cable
RS232 cable
Setting:
(1)Setting the projected image as the same dimension by each projector.
(2)Press Menu button on the remote controller or control panel to pop up the OSD.
(3)Press ▲▼ button to select "Display"
(4)Press ▲▼ button to select "Aspect"
(5) Press ▲▼ button to select "Advanced" and press OK to ready for Edge Blending
function.
Adjustment:
The color and effect of the overlay edge can be adjusted with the Edge Blending
software.
The Edge Blending Software and its manual can be downloaded from EIKI website.
URL: http://www.eiki.com
Note:
● Edge Blending function can only effected with the same resolution projectors.
● Edge Blending function can apply via HDMI, VGA and RGBHV as input source.
● Setting the same lavel and prosition with the same dimension image would make the better
effect after edge blending adjustment.
......
Projector#2 Projector#N
Video
cable
Video
cable
Video cable
Video duplicator
RS232 RS232
cable cable
RS232 cable
Computer
69