Color Adjust - Eiki EK-350U Owner's Manual

OSD setting-Display
System
The projector automatically tunes to various types of computers with its function of Multi-scan system
and Auto PC Adjustment. If a computer is selected as a signal source, the projector automatically de-
tects the signal format and tunes to project proper images without any additional setting.
One of the following messages may ap-
pear when input source as computer:
When the projector cannot recognize
Auto
the connected signal conforming to
the provided computer system, Auto
is displayed on the System menu
box and the Auto PC Adj. function
works to display proper images. If
the image is not projected properly,
a manual adjustment is required.
There is no signal input from computer.
-----
Check the connection between the
computer and projector.
When input source as VIDEO or S-Video
Auto
The projector may auto detect the input video
system and adjust to the optimum status. For
PAL-M or PAL-N video system, select the sys-
tem manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/
PAL-N
If image cannot be displayed correctly, you may
need to select one from PAL, SECAM, NTSC,
NTSC 4.43, PAL-M and PAL-N for playing.
Note:
● When HDMI, Component, HDBaseT, Network or USB display is selected, System menu for
computer is disable.
40
System menu
Display
Auto PC adj.
Fine sync 17
H Position 0
V Position 0
H. Size 0
Aspect Normal
Project way Front
Menu position Center
Background display Blue
System 1024 x 768, 60Hz
System for computer signal
Display
System
1024 x 768, 60Hz
----
----
----
----
----
VIDEO or S-Video system menu
Display
System
Auto
PAL
SECAM
NTSC
NTSC4.43
PAL-M
PAL-N
PAL-60
OSD setting-Color Adjust (HDMI 1, HDMI 2, VGA 1, VGA 2, Me-
mory Viewer, Network and USB Display signal)

Color Adjust

Menu operation
1 Press the MENU button on remote controller and the OSD displays. Press
Color Adjust icon, press button or OK button to confirm the selection.
2 Press button to point to required item and press OK button to confirm the selection.
Image mode
Switch image mode to fit the image source and
the projector.
Dynamic
The light output is maximized for use in bright
areas.
Standard
The picture becomes suitable for moving images
in general.
Cinema
Enriched grayscale for viewing movies.
Chalkboard (Green)
An image mode designed for displaying on a
chalkboard (Green). It boosts quality of image
projected on chalkboard (Green).
DICOM
A highly clear X-ray image is reproduced. Digital radiographs with excellent detail and clarity for medi-
cal training, presentations and conferences.
Colorboard
Image mode suitable for image projecting on surface of wall in red, blue, yellow or green.
User Image
Default image mode set by users in the Image Adjust menu.
Contrast
Press button to decrease contrast, press
Brightness
Press button to decrease brightness, press
Color Temp.
Press button to select required color temperature
High: Blueish image color
Mid.: Natural image color
Low: Reddish image color
Red
Press button to lighten red tint and button to darken it.
Green
Press button to lighten green tint and button to darken it.
Blue
Press button to lighten blue tint and button to darken it.
Sharpness
Press button to soften image and button to sharpen it.
button select
Color adjust
Image mode Standard
Contrast
Brightness
Color temp.
Red
Green
Blue
Sharpness
button to increase contrast.
button to increase brightness
32
32
Mid
32
32
32
8
41