Table of Contents
Advertisement
Description on using
useful function
Description on network control operation
LAN control
Function : PC controls projector via LAN.
Preparation:
1. Equipments: PC, projector, cables
2. Connection procedures:
Connect the projector to routers or switches of the LAN by direct on cross cable. If it fails to
connect PC and projector by parallel cable, please switch to cross cable as suggested.
3. After the computer is booted and the projector is plugged in, indicator lights of LAN interface
and computer interface will flash continuously.
Operation procedures:
1 Turn on the projector.
2 Obtain network address. DHCP set is displayed as on and obtain network address
automatically. If familiar with network, you can set DHCP as close and obtain network
address manually.
3 Enter network settings menu.
(1) Press MENU button on control panel
or remote control to display screen
menu. Press ▲▼ button to select
"Expand" icon, then press the OK
button.
(2) Press ▲▼ button to select
"Network"setting and press the OK
button enter the network setting.
(3)Press ▲▼ button to set DHCP as on.
(4) Press ▲▼ button to "Set" and
press the OK button."Please wait..."
appears.
Expend
Network
Network setting
Network information
MAC address
7C 6F F8 4E 48 A8
IP address
192.168.1.100
LAN
Network setting
DHCP
On
IP address
Subnet
Gateway
DNS
Cancel
Set
Move
Next
Back
ENTER
MENU
57
Advertisement
Table of Contents
