Zoom / Focus Function; Lens Shift Function; Keystone Adjustment; Auto Setup Function - Eiki EK-350U Owner's Manual

Basic operation

Zoom / focus function

Rotate the ZOOM ring to zoom in or zoom out
the image.
Rotate the FOCUS ring to adjust the focus of
the image.

Lens Shift function

Perform the lens shift adjustment with ① and
② .
Rotate ① , the screen may deviate up-and-
down from the central axis of lens shift up:38%
and down:32% elevation of the display.
Rotate ② , the screen may deviate left-and-
right from the central axis of lens shift 8%
width of the display.
Adjustable pad
The projector can be adjusted up to 5º with the
adjustable pads.
Rotate the adjustable pad to lift the projector to
a certain height. During lifting, rotate the pad
clockwise.
To lower or retract the adjustable pads, rotate
the pad counterclockwise.
Keystone distortion of projected images can
be corrected by auto settings, remote control
operation or menu operation.
30
ZOOM ring
FOCUS ring
(outer)
(inner)
①
②
Adjustable pads
Basic operation

Auto setup function

Press the AUTO button on the remote control-
ler to auto execute settings given in the Auto
Setup menu (including Auto Searching, Auto
PC Adjusting and Auto Keystone).

Keystone adjustment

You may adjust keystone distortion of image in the projec-
tor with the keystone adjustment.
Follow steps below to adjust keystone distortion of pro-
jected image manually.
Press the KEYSTONE button on the remote controller.
The Keystone selection menu show up, press
to select the adjustment.
The keystone adjustment dialog box displays, press
button to adjust keystone distortion.
You may save the settings for keystone adjustment.
H/V Keystone
Adjust the projected image when the projector is on
the horizontal or vertical keystone distortion.
Corner correction
Adjust the projected image when the projector is
keystone distortion of four corners.
Curved correction
Adjust the projected image when the projector linear-
ity is uneven or the projected images bent vertically
and horizontally.
(*This function is unavailable of EK-350U)
Reset value
The correction values will be restored to the factory
defaults.

Keystone adjustment

● The arrow mark looks white when there is no keystone adjustment in existence.
● The arrow mark indicating the adjustment direction turns red.
● The arrow mark disappears when the maximum adjustment limit reaches.
● The keystone adjustment will be canceled if you press the keystone adjustment button when it is
displaying.
● The adjustable range is subject to source of signal input.
Auto
Expend
Auto setup
Input search
Expend
Auto PC adj.
Auto setup
Input search
Auto PC adj.
Auto keystone
Auto keystone
Keystone
adjustment
button
Keystone adjustment
*for WXGA model
H/V Keystone
Corner correction
Curved correction
Reset value
*for WUXGA model
H/V Keystone
Corner correction
Reset value
31