Menu Operation - Eiki EK-350U Owner's Manual

Input selection
Select it when the video input signal
S-video
is connected to VGA IN 2(YPbPr/
S-VIDEO) terminal via S-Video to
VGA adaptor cable
When input source is from device
Memory Viewer
connected to USB-A terminal, please
select "Memory Viewer".
When input source is from network
Network
connected to LAN terminal with LAN
cable, please select "Network".
When input source is from the device
USB Display
connected to Micro-USB terminal,
please select "USB Display".
Note:

- When the "Input search" function is set to "On" in the "Auto setup" function, the input signal
except "USB Display", "Memory Viewer" and "Network" will be searched automatically.
- When signal is in "USB Display","Memory Viewer" and "Network", FREEZE, ASPECT, IMAGE,
AUTO SETUP, TEST PATTERN and SCREEN function cannot work.
34
Remote control
HDMI 2
VGA 2
HDBaseT
HDMI 1
VIDEO
VGA 1
USB-A
COMPONENT
INPUT
Control Panel
INPUT
Input select menu
VGA 1
VGA 2
HDMI 1
HDMI 2(MHL)
HDBase T
Component
Video
S-video
Memory Viewer
Network
USB Display
Basic operation
How to use the OSD
Main menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System

Menu operation

1. Press the MENU button on the rear control
panel or remote controller and the OSD
displays.
2. Press button to act on or select one
main menu item. Press button or OK
button to enter a submenu.
3. Press button to select required sub-
menu, then press OK button or button to
set up or enter an option.
4. Press button to select settings or
navigate options, then press OK button to
act on the item and exit.
5. Press  button to return to mainmenu.
Press the MENU button on remote control-
ler or control panel to exit the OSD.
Sub menu
17
0
0
0
Normal
Front
Center
Blue
1024 x 768, 60Hz
OK
Menu
OK
Menu
35