Memory Viewer - Eiki EK-350U Owner's Manual

OSD setting-Memory Viewer

Memory Viewer

The Memory Viewer function makes it possible to project the pictures which are stored in the USB
memory when the USB memory is inserted into the projector
1 Press MENU button on the remote control to display screen menu.
2 Press  button to select "Memory Viewer", then press the OK button.
3 Press  button to select the item you want to set, press the OK button.
4 Press  button to adjust the item, then press the OK button.
Set Slide
Start the slide show.
Slide transition effect
Set the slide transition effect when the slide
show image is switching.
Slide down ......... Switch the image from the top
to the bottom.
Slide right ........... Switch the image from the left
to the right.
Pressto select "Apply" and press the OK
button to execute the setting.
Sort Order
Set the sort order of the slide show.
Extend Order .... Sort files or folders in
extended order.
Size Order ........ Sort files or folders in
amount of data order.
Time Order ....... Sort files or folders in stored
time order.
Name Order ...... Sort files or folders in name order.
Pressto select "Apply" and press the OK button to execute the setting.
Rotate
Set the rotate direction of image.
No Rotate ........ Rotate is disabled.
270 Degrees .... Rotate 270 degrees in anti-clockwise direction.
180 Degrees .... Rotate 180 degrees.
90 Degrees ...... Rotate 90 degrees in anti- clockwise direction.
Pressto select "Apply" and press the OK button to execute the setting.
Best Fit
Set the image whether or not to fit with the projected screen.
On ...... Display the image to fit with the aspect of the projected screen.
Off ...... Display in the normal pixels of the image.
Pressto select "Apply" and press the OK button to execute the setting.
Repeat
Enable or disable repeat function of the slide show.
On ......Display all of the files repeatedly.
Off ...... Return to the thumbnail page after the last file is broadcasted.
Pressto select "Apply" and press the OK button to execute the setting.
Apply
Execute the setting in slide show mode.
Press  to select "Apply", then press the OK button, the setting of the items except the "Set Slide"
will be effective.
54
Memory Viewer menu
Memory
Viewer
Set slide
Slide transition effect Slide right
Sort order Name order
Rotate No rotate
Best fit Off
Repeat Off
Apply
 Note:
● The "Memory Viewer" menu is available
select the input source as "Memory Viewer".
● All the setting except "Set Slide" will effective
after execute "Apply".
● See page 65 for Memory viewer function.
Information
The information menu is used to the detect signal of projected image and running state.
Menu operation
Press MENU button on the remote control
or control panel to display the screen menu.
Press  to select Info., the information menu
will appear as the right picture.
The status of projector will display in
information menu.
Input
The selected input source is displayed.
H-sync freq .
The horizontal frequency of the input signal is
displayed in KHz or - - - -KHz when no signal is
detected.
V-sync freq .
The vertical frequency of the input signal is
when
displayed in Hz or - - - - Hz when no signal is
detected.
Light source status
The setting status of "Light source mode" is
displayed.
Light source counter
The usage time of the light source is displayed.
Power management
The setting status of "Power management" is
displayed.
Image mode
The setting status of "Image mode" is
displayed.
OSD setting-Info.
info. menu
Info.
Input
H-sync freq.
V-sync freq.
Light source status
Light source counter
Power management
Image mode
Computer 1
1024 x 768, 60Hz
48.24 kHz
60.06 Hz
2 H
Ready
5 Min
Standard
55