Compliance And Markings; Iec 61010-1 Compliance; Electromagnetic Compatibility (Emc); Safety - Keysight E4416A Installation Manual

Compliance and Markings

IEC 61010-1 Compliance

This instrument has been designed and tested in accordance with publication
EN61010-1(1993) / IEC 61010-1(1990) +A1(1992) +A2(1995) / CSA C22.2
No. 1010.1(1993) Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use, and has been supplied in a safe condition. The
instruction documentation contains information and warnings which must be
followed by the user to ensure safe operation and to maintain the instrument in a
safe condition.

Electromagnetic Compatibility (EMC)

This product conforms with the protection requirements of European Council
Directive 89/336/EEC for Electromagnetic Compatibility (EMC).
The conformity assessment requirements have been met using the technical
Construction file route to compliance, using EMC test specifications
EN 55011:1991 (Group 1, Class A) and EN 50082-1:1992.
In order to preserve the EMC performance of the product, any cable which
becomes worn or damaged must be replaced with the same type and
specification.
Refer to the Declaration of Conformity on Notices.

Safety

This instrument has been designed and tested in accordance with publication
EN61010-1(1993) / IEC 1010-1(1990) +A1(1992) +A2(1995) / CSA C22.2
No. 1010.1(1993) Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use, and has been supplied in a safe condition. The
instruction documentation contains information and warnings which must be
followed by the user to ensure safe operation and to maintain the instrument in a
safe condition.
Keysight E4416A and E4417A Installation Guide 7