Chapter 7 Emc Directives; Requirements For Compliance With The Emc Directive - Mitsubishi Electric R64MTCPU User Manual

7
EMC DIRECTIVES
Compliance to the EMC Directive, which is one of the EU Directives, has been a legal obligation for the products sold in
European countries since 1996 as well as the Low Voltage Directive since 1997.
Manufacturers who recognize their products are compliant to the EMC and Low Voltage Directives are required to declare that
print a "CE mark" on their products.
Authorized representative in Europe
Authorized representative in Europe is shown below.
Name: Mitsubishi Electric Europe B.V.
Address: Gothaer strase 8, 40880 Ratingen, Germany
7.1
Requirements for Compliance with the EMC
Directive
The EMC Directive specifies that products placed on the market must be so constructed that they do not cause excessive
electromagnetic interference (emissions) and are not unduly affected by electromagnetic interference (immunity)". This
section summarize the precautions on compliance with the EMC Directive of the machinery constructed with the MELSEC iQ-
R series modules.
These precautions are based on the requirements and the standards of the regulation, however, it does not guarantee that the
entire machinery constructed according to the descriptions will comply with above-mentioned directive. The method and
judgment for complying with the EMC Directive must be determined by the person who construct the entire machinery.
7 EMC DIRECTIVES
68

7.1 Requirements for Compliance with the EMC Directive