Winmove - Siemens SIMATIC IPC277D Operating Instructions Manual

Operating the device

6.8 WinMove

6.8 WinMove
"WinMove" allows you to move program windows vertically in order to display window areas
that extend beyond the display area. "WinMove" is available on devices with a vertical
resolution of ≤ 600 pixels.
Procedure
1. Open "WinMove" using the corresponding icon on the desktop.
The "WinMove" window with the "Up" and "Down" buttons is displayed.
2. Move the open program window using the "Up" and "Down" buttons.
WinMove parameters
As soon as the "WinMove" window is visible, the "WinMove" icon is displayed in the taskbar:
By right-clicking on the "WinMove" icon, you open the "WinMove" shortcut menu:
Via the shortcut menu, you can set the following WinMove parameters:
● "Step size": Determines the increment when you press the "Up" and "Down" buttons.
● If "top level window" is activated, only the program window in the foreground is moved.
Otherwise, all open program windows are moved.
● If "check region" is activated, it is not possible to move program windows completely out
of the desktop area.
Note
If the taskbar parameter "Auto-hide the taskbar" is not activated, windows which are
moved downwards can disappear behind the taskbar, even if the "WinMove" parameter
"check region" is activated.
● With the "visible" parameter, you display or hide the "WinMove" window.
Use "exit" to end WinMove.
76
Operating Instructions, 12/2016, A5E03409486-AE
SIMATIC IPC277D