Download  Print this page

Inserting And Removing Compactflash Cards - Siemens SIMATIC IPC277D Operating Instructions Manual

Industrial pc.
Hide thumbs

Advertisement

7.2

Inserting and removing CompactFlash cards

The device is equipped with a slot for a CF memory card type I/II.
Requirement - removing the CF memory card
● The device is switched off.
Procedure
Requirement - inserting the CF memory card
● A CF memory card that is approved for industrial use.
This device is only approved for operation with CF memory cards as of product version
03.
Note
Always replace the CF memory card with a card of the same product version.
SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE
Device expansion and parameter assignment
7.2 Inserting and removing CompactFlash cards
Release the lock of the cover.
Grip the cover on its rear side in
direction of the arrow.
Open the cover completely.
Press the ejector button.
The memory card is pushed out
of the slot.
Pull the memory card out of the
slot.
Grip the memory card on its web
on the bottom side when pulling
it out.
79

Advertisement

   Also See for Siemens SIMATIC IPC277D

Comments to this Manuals

Symbols: 0
Latest comments: