Names And Functions Of Main Parts - Panasonic AW-360B10 Operating Instructions Manual

Preparation

Names and Functions of Main Parts

1 Power button [
Status indicator (l
≥ The status indicator normally lights or flashes in green.
When there is a problem, it lights or flashes in red.
2 Air outlet (cooling fan)
3 Function button/Function lamp [FUNC]
≥ If you press and hold the function button (approx.
10 seconds) while the unit is turned on, the [Networks]
settings, such as the IP address setting
the login ID and password settings
the factory defaults.
When initialization starts, the status indicator (red) and
the function lamp will start flashing alternately.
Even after the settings are returned to the factory
defaults, there may be times when you want to restore
the factory defaults again. In such cases, before
performing the operation, turn off and on the unit.
1
4 5
] (l 21)/
21)
(l 44), and
(l 41) will return to
2
6 7 8
≥ The function lamp lights while a card is being
accessed. For example, it will light when you format a
card on the Camera Head.
≥ Do not perform the following while the card is being
accessed (while the function lamp is lit). Doing so may
damage card data or cause the unit to malfunction.
j Removing the microSD card from the Camera Head
j Turning off the unit
j Shaking or striking the unit
4 [CAM 1 IN] terminal
5 [CAM 2 IN] terminal
6 [CAM 3 IN] terminal
7 [CAM 4 IN] terminal
≥ Use these terminals when connecting the unit and
the Camera Head with HDMI Cables.
Do not use the terminals for connection to other
devices.
8 CAMERA terminal
17
3
(l 19)
(l 19)
(l 19)
(l 19)
(l 19)