Table of Contents
Advertisement
Problem
The pictures are too light or
too dark
When fine lines or cyclical
patterns are shot, flickering
is seen or coloring is added
to them
Noise occurs in the audio
input
Noticeable seams appear on
the 360-degree video.
The subjects look unnatural
in the combined image.
∫ With other products
Problem
Although this unit is
correctly connected to an
external monitor, images
cannot be seen.
Even when this unit is
connected to the external
monitor by the HDMI Cable,
images or sounds are not
output.
The images and sound break
up.
Images do not appear.
∫ Others
Problem
If the microSD card is
inserted in the Camera Head,
it is not recognized.
∫ Web screen
Problem
I have forgotten the IP address,
user name, and/or password.
≥ Set the [Mode] for exposure adjustment to [Auto].
≥ This phenomenon occurs because the pixels are arranged systematically on
each image sensor. It is noticeable when the spatial frequency of a subject
and the pixel pitch are brought into proximity so change the camera angle or
take other such action.
≥ Confirm the following.
j Are the Camera Head, the unit, the switching hub, or other peripheral
devices grounded?
j Are power lines are running nearby?
j Is equipment generating strong electric or magnetic fields (e.g., television
and radio antennas, air conditioning compressors, power transformers)
located nearby?
≥ Noticeable seams may appear when the subjects move. When they appear,
set the Automatic Parallax Correction Mode to [Auto].
≥ When the Parallax Correction Mode is set to [Auto], a low-contrast or dark
subject may cause unstable stitching operation.
≥ Noticeable seams may appear when the exposure or White Balance of the
camera units are set individually. In this case, set the exposure and White
Balance to Master Camera Mode.
≥ Please read the operating instructions of your external monitor and select the
channel that matches the input used for the connection.
≥ Check if the HDMI Cable is connected correctly.
≥ Insert the HDMI Cable all the way in.
≥ Check what signals are supported by the HDMI monitor.
≥ When the movements of subjects are not smooth, setting the picture display
([Picture Display]:
l
27) to [Off] may solve the problem.
≥ If you disconnect and connect the HDMI Cable while the unit is turned on, the
images and sound may break up or stop being output. When this occurs, turn
off and on the unit with the HDMI Cable plugged in.
≥ If you disconnect the HDMI Cable and connect it to another device while the
unit is turned on, it may take some time until images appear.
≥ If the microSD card is formatted on a PC, it may not be recognized by this
unit. Use this unit to format microSD cards.
≥ Operate the function button
defaults, and then access the unit.
57
Check points
(l
(l
32,
l
35)
Check points
Check points
(l
51)
Check points
(l
17) to reset their settings to the factory
31)
(l
28)
Advertisement
Table of Contents
