Table of Contents
Advertisement
Maintenance
Warning Indications
If a problem is detected immediately after the unit is turned on or while you are operating it, the status indicators of the
unit and the Camera Head and a web screen indication report the problem.
Web screen indication
Camera Head
Meaning of the warning
connection
error
Operation of the unit
Web screen indication
Firmware
Meaning of the warning
version error
Operation of the unit
Web screen indication
Restart
Meaning of the warning
request
Operation of the unit
Web screen indication
Low input
voltage
Meaning of the warning
Operation of the unit
Status indicator
Solution
Status indicator
Solution
Status indicator
Solution
Status indicator
Solution
The status indicator of the unit flashes in red.
The message [Check Cable. Turn Power Off.] is displayed.
There is a problem in the connection to the Camera Head.
The operation stops.
Turn off the unit, check the connection to the Camera Head, and
turn on the unit again.
The status indicators of the unit and the Camera Head light up in
red.
The message [Firmware update.] is displayed.
Older firmware versions are running on some of the camera units of
the Camera Head.
The operation continues.
Update the firmware of the camera units that are running older
versions.
The status indicator of the unit flashes in red once every 1 second.
The message [Turn Power Off.] is displayed.
The unit needs to be restarted.
The operation stops.
Press the power button to turn off the unit, and then press the power
button again to turn it on. If the warning persists, consult your dealer.
The status indicators of the unit and the Camera Head light up in
red.
The message [Check Battery.] is displayed.
The voltage of the DC power supply is low.
The operation stops. This unit turns off automatically.
Replace the DC power supply.
54
Advertisement
Table of Contents
