Table of Contents
Advertisement
Firmware update information
For the most current information regarding the update, confirm at the following support site.
≥ Updating is not possible with illegal firmware files.
≥ It takes about 40 minutes to update the firmware of the unit. Use a DC power source with enough charge. Do not
operate the unit while a firmware update is in progress.
The status indicator will flash in green when the update is complete. Turn off and on the unit.
≥ When updating the firmware of the Camera Head:
j Before updating the firmware with an microSD card, perform [SD Card Format]
j Update all of the camera units (CAM1-CAM4) to the same version. The Camera Head does not operate properly
if the camera units run different versions.
j Turn off and on the unit after the update is complete. Go to [Firmware Version] (CAM1-CAM4)
that the firmware of the Camera Head has been updated.
≥ Do not turn off the unit while an update is in progress. Keep in mind that if the unit is turned off, the update will not
complete.
Hour meter screen [Hour Meter]
The total operating times of the unit and the Camera Head are displayed. (Up to 999999h)
1 Camera Head
Displays the Camera Head's total operating time.
2 Base Unit
Displays the unit's total operating time.
http://pro-av.panasonic.net/
53
(l
51) to format the card.
(l
52) to confirm
Advertisement
Table of Contents
