Table of Contents
Advertisement
Web screen operations
Exposure (gain/shutter speed) adjustment
Adjust the exposure (gain and shutter speed).
In Master Camera Mode, it is possible to apply the setup of the master camera to all areas of the 360-degree video
through coordinated exposure control. This mode can only be set on the advanced adjustment screen.
≥ Factory settings: Master Camera Mode (CAM2)
≥ Setting value:
Gain
Shutter speed
1
Click the stitching adjustment button 1.
2
Click the main area 2 to select the camera unit to be
adjusted.
≥ In Master Camera Mode (factory settings), it is not possible to select a
camera unit on the main area. Switch to Detail Mode on the advanced
adjustment screen.
≥ The area of the selected camera unit is indicated by the red frame.
3
Use the pull-down menu 3 to change the mode.
[Auto]
Adjusts the level automatically.
[Manual]
Adjusts the level manually.
4
(When [Manual] has been selected) Click the item to be set.
[Gain]
4
[Shutter]
5
0 dB to 30 dB
1/30 to 1/12000 seconds (when [Capture Mode] is set to [NTSC])
1/25 to 1/12000 seconds (when [Capture Mode] is set to [PAL])
(l
33)
Click the slide bar to adjust the gain.
Use the pull-down menu to adjust the shutter speed.
31
(l
32)
CAM1
CAM2 CAM3 CAM4
Advertisement
Table of Contents
