Table of Contents
Advertisement
Note
f The supplied screws are spare. Use them when a screw to fix the slot cover of the projector
is lost.
f The model numbers of accessories are subject to change without prior notice.
Part names and functions
1
<SDI 1 IN> terminal
This is a terminal to input SDI signals
(SD-SDI / HD-SDI / 3G-SDI / 6G-SDI /
12G-SDI).
2
<SDI 2 IN/1 OUT> terminal
This is a terminal to input SDI signals
(SD-SDI / HD-SDI / 3G-SDI). It is also
an active through terminal to output the
SDI signals (SD-SDI / HD-SDI / 3G-SDI
/ 6G-SDI / 12G-SDI) input to the <SDI 1
IN> terminal.
Note
f The <SDI 2 IN/1 OUT> terminal and <SDI 4 IN/3 OUT> terminal do not support the input of
6G-SDI signals and 12G-SDI signals.
f To use the <SDI 2 IN/1 OUT> terminal and <SDI 4 IN/3 OUT> terminal as output terminals,
you need to change the settings of the projector. Check the Operating Instructions of your
projector.
Installing the Interface Board
It is recommended to ask a qualified technician to install or remove the
Interface Board to a projector. A malfunction may occur due to static
electricity. Consult your dealer.
Before installing or removing the Interface Board
f Always turn off the power of the projector before installing or removing the
Interface Board.
g Make sure to follow the procedure described in the Operating
Instructions of your projector when turning off the power.
Installing the Interface Board
5
1
2
3
4
5
3
<SDI 3 IN> terminal
This is a terminal to input SDI signals
(SD-SDI / HD-SDI / 3G-SDI / 6G-SDI /
12G-SDI).
4
<SDI 4 IN/3 OUT> terminal
This is a terminal to input SDI signals
(SD-SDI / HD-SDI / 3G-SDI). It is also
an active through terminal to output the
SDI signals (SD-SDI / HD-SDI / 3G-SDI
/ 6G-SDI / 12G-SDI) input to the <SDI 3
IN> terminal.
5
Handle
ENGLISH - 5
Advertisement
Table of Contents
