Table of Contents
Advertisement
Part names and functions
1
SFP port 1
This is the port to install the SFP module
for receiving.
2
SFP port 2
This is the port to install the SFP module
for sending and receiving.
Note
f The sending function of the SFP module for sending or for sending and receiving
will not operate when it is installed in the SFP port 1.
f In addition to the SFP module for sending and receiving, the SFP module for
receiving or for sending can be installed in the SFP port 2.
rWhen the SFP modules are installed
This is an example when the SFP module for receiving (LC connector) is
installed in the SFP port 1, and the SFP module for sending and receiving
(LC connector) is installed in the SFP port 2.
1
<SDI OPT 1 IN> terminal/<SDI OPT 2
IN> terminal
These are terminals to input SDI signal
(optical signal).
Note
f The input signal to the <SDI OPT 1 IN> terminal or the <SDI OPT 2 IN> terminal
that is selected for input is output from the <SDI OPT OUT> terminal.
Precautions for use
SDI OPT
1 IN
OUT
2 IN
SIGNAL
TY-SB01FB
12G/3G/HD
3
2
1
SDI OPT
1 IN
OUT
2 IN
SIGNAL
TY-SB01FB
12G/3G/HD
1
2
1
3
Input indicator <SIGNAL>
This is the indicator to indicate the
detection state of the video signal. This
is illuminated when input of the video
signal is detected in either or both of the
<SDI OPT 1 IN> terminal and the <SDI
OPT 2 IN> terminal.
2
<SDI OPT OUT> terminal
This is an active through terminal to
output the signal input to the <SDI OPT
1 IN> terminal/<SDI OPT 2 IN> terminal.
ENGLISH - 7
Advertisement
Table of Contents
