Table of Contents
Advertisement
HDP 101 4K • User Guide (Continued)
Assigning EDID
To assign EDID to the input:
From the Input box on the right (see
1.
From the Favorites, Available EDID, or Connected Output panel on the left, select the desired EDID.
2.
Then either:
3.
Click the Assign button (
•
OR
Drag and drop the EDID image from the Favorites, Available EDID, or Connected Output panels to the Input box.
•
Adding EDID to the EDID Library
Click the Add EDID to Library button (see figure 11,
1.
window opens (see figure 12).
Figure 12.
Browse Add EDID to the Library Window
Navigate to the desired EDID file location and select it (
2.
NOTE:
Valid EDID files have a .bin file extension.
Click the Open button (
3.
Device Menu
1
the device from PCS
Disconnect
2
View the hardware
3
to factory default
Reset Device
4
Update Firmware
5
View information
About this Module
Extron PCS Help File
For assistance, Extron PCS Help contains complete information about using the
program to configure the HDP 101 4K.
To access Extron PCS Help, click the button in the top right corner of the PCS program
screen (see the image on the right,
© 2018 Extron Electronics All rights reserved. All trademarks mentioned are the property of their respective owners.
figure 11,
7
8
) to assign EDID to the input.
1
2
). The EDID is added to the Available EDID panel.
Settings
1
) and click on Extron PCS Help (
on the previous page), select the input.
9
on the previous page). The Browse Add EDID to Library
2
1
).
1
2
3
4
5
2
).
1
2
www.extron.com
68-3198-01
Rev. A 02 18
Advertisement
Table of Contents
