Table of Contents
Advertisement
HDP 101 4K • User Guide (Continued)
Product Configuration Software
The HDP 101 4K uses Extron Product Configuration Software (PCS) to configure and reset the unit, as well as upload firmware.
Download Software from the Extron Website
Visit
www.extron.com
to download the latest version of PCS.
NOTE:
Also download the latest versions of software and firmware for the HDP 101 4K. To update firmware, use PCS or
download and install Firmware Loader.
Click the Download link at the top of the
1.
2 2
Software and Firmware Links on Download Page
Figure 5.
Click the appropriate link on the left sidebar menu (
2.
For software, either click the Software link at the top of the sidebar or, if the software is listed in the sidebar, click directly on
that link (for example, see the
If there is no direct link to the software or firmware, scroll down to the alphabetic navigation bar (see figure 6).
3.
Alphabetic Navigation Bar
Figure 6.
Click the appropriate letter to locate the software or firmware (for example, click H for the HDP 101 4K).
4.
Click Download and follow the on-screen instructions.
5.
Using PCS
Connect the control PC, with PCS installed, to the HDP 101 4K. The Windows-based PCS communicates with the device via
1.
the Front Panel Configuration port (see figure 2,
Open PCS on the control PC from the PCS icon loaded on the desktop (optional, see image on the right) or
2.
from the Start menu:
Start>Programs>Extron Electronics>Extron Product Configuration Software>Extron
Product Configuration Software
The Product Configuration Software opens to the Device Discovery screen:
Figure 7.
PCS Device Discovery Screen
Extron website
1 1
2
link in figure 5 ,
2
PCS
A
1
1
(see figure 5 ,
).
).
).
page 3) with a standard USB mini-B connector.
3
2
7
Advertisement
Table of Contents
