Primary Displays & Menus
The Pipe Menu
Flow/Negative
Signal Strength/Low
Signal Cutoff
The Pipe Menu
5-2
DCT6088 User Guide
The Flow/Negative Totalizer primary display (03) indicates the flow rate
and the totalized flow in the negative flow direction. If the negative
Totalizer
totalizer is not currently enabled, the last net totalized value is displayed.
Figure 5–4. Flow/Negative Totalizer primary display
The Signal Strength/Low Signal Cutoff primary display (04) indicates the
values for signal strength and low signal cutoff.
Figure 5–5. Signal Strength/Low Signal Cutoff primary display
The Pipe menu contains additional items that are not included in the
setup procedure
Pipe Wall Thickness setup menu (11)
●
Figure 5–6. Pipe Wall Thickness setup menu
Pipe Sound Speed setup menu (14)
●
This menu can only be configured if OTHER was selected as the pipe
material (13). Enter the pipe sound speed. If OTHER was not selected
as the pipe material, this menu is available by the direct access method
only and functions as a view-only display to indicate the pipe sound
speed as programmed in the instrument's database.
Figure 5–7. Pipe Sound Speed setup menu
described in Chapter 4. These items are listed below.
quick
Thermo Fisher Scientific