Changing The Parking Light Bulb - Husqvarna 701 Supermoto Owner's Manual

15 ELECTRICAL SYSTEM
15.10
Note
Damage to reflector Grease on the reflector reduces the brightness.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
190

Changing the parking light bulb

E00038-10
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Pull bulb socket out of the reflector.
–
2
Pull parking light bulb
–
Insert a new parking light bulb in the bulb socket.
Parking light (W5W / socket W2.1x9.5d) (
–
Insert the bulb socket in the reflector.
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
p. 186)
out of the bulb socket.
p. 246)
p. 187)
p. 191)