Table of Contents
Advertisement
13 BRAKE SYSTEM
13.1
132
Antilock brake system (ABS)
ABS
ABS
H01077-10
1
The ABS unit
, which consists of a hydraulic unit, ABS con-
trol unit, and return pump, is installed under the seat. One wheel
speed sensor
2
is located in each case on the front and the
rear wheel.
Warning
Danger of accidents Changes to the vehicle impair the
function of the ABS.
–
Only allow the rear wheel to spin with the front brake
applied if the ABS is switched off (burn out).
–
Do not make any changes to the suspension travel.
–
Only use spare parts on the brake system which have
been approved and recommended by Husqvarna
Motorcycles.
–
Only use tires/wheels approved by Husqvarna Motor-
cycles with the corresponding speed index.
–
Maintain the specified tire air pressure.
–
Service work and repairs must be performed prop-
erly. (Your authorized Husqvarna Motorcycles work-
shop will be glad to help.)
Advertisement
Table of Contents
