SERVICE WORK ON THE CHASSIS 12
Main work
–
Remove screws
–
Remove screws
Info
A tool for removing and mounting these screws is
located in holder
–
Take off the left side cover.
–
Open the tool set compartment and store tool set
–
Close the tool set compartment.
–
Position the left side cover.
–
Mount and tighten screws
Guideline
Screw, trim
–
Mount and tighten screws
Guideline
Screw, trim
V00796-10
–
Make sure the tool is reinserted in holder
Finishing work
–
Mount the seat. (
1
.
2
.
A
on the underside of the seat.
2
.
M5x12
3.5 Nm (2.58 lbf ft)
1
.
M5x17
3.5 Nm (2.58 lbf ft)
A
p. 107)
3
.
.
109