Table of Contents
Advertisement
21 TROUBLESHOOTING
Faults
The engine does not turn when
the starter button is pressed
Engine turns only if the clutch
lever is drawn
The engine turns but does not
start
232
Possible cause
Operating error
The battery is discharged
Fuse 1 or 2 blown
Main fuse burned out
No ground connection present
The vehicle is in gear
The vehicle is in gear and the
side stand is folded out
Operating error
Fuse 3 blown
The plug-in connection of the
fuel hose connection is not
connected
Defect in fuel injection system
Action
–
Carry out the start procedure.
(
p. 59)
–
Recharge the battery.
–
Check the open-circuit current.
–
Change the fuses of individual power
consumers. (
p. 183)
–
Adjust the clock. (
p. 46)
–
Change the main fuse. (
–
Check the ground connection.
–
Shift gear to neutral.
–
Shift gear to neutral.
–
Carry out the start procedure.
(
p. 59)
–
Change the fuses of individual power
consumers. (
p. 183)
–
Connect the plug-in connection of the
fuel line.
–
Read out the fault memory using the
Husqvarna Motorcycles diagnostics
tool.
(
p. 174)
p. 177)
Advertisement
Table of Contents
