11 TUNING THE CHASSIS
11.12
92
Adjusting the riding sag
Finishing work
–
Install the shock absorber.
–
Install the rear right side cover.
–
Install the rear left side cover.
–
Fit the rear fairing.
–
Install the air filter box.
–
Mount the side cover. (
–
Mount the seat. (
p. 107)
–
Remove the motorcycle from the work stand.
Preparatory work
–
Raise the motorcycle with the work stand.
–
Remove the seat. (
p. 106)
–
Take off the side cover. (
–
Remove the air filter box.
–
Remove the rear fairing.
–
Remove the rear left side cover.
–
Remove the rear right side cover.
–
Remove the shock absorber.
–
After removing the shock absorber, clean it thoroughly.
p. 111)
p. 110)