Table of Contents
Advertisement
21 TROUBLESHOOTING
Faults
Engine overheats
Malfunction indicator lamp
lights up or flashes
N The idling speed indicator
lamp does not light up when
the transmission is in neutral
Engine dies during the journey
ABS warning lamp lights up
High oil consumption
234
Possible cause
Defect in radiator fan system
Air in cooling system
Defect in fuel injection system
Gear position sensor not pro-
grammed
Lack of fuel
Fuse 1, 2 or 3 blown
The ABS fuse is blown
Large difference in wheel
speeds of the front and rear
wheels
Malfunction in ABS
Engine vent hose bent
Engine oil level too high
Action
–
Check the radiator fan system.
–
Fill/bleed the cooling system.
(
p. 201)
–
Read out the fault memory using the
Husqvarna Motorcycles diagnostics
tool.
–
Read out the fault memory using the
Husqvarna Motorcycles diagnostics
tool.
–
Refuel. (
p. 73)
–
Change the fuses of individual power
consumers. (
p. 183)
–
Change the ABS fuses. (
–
Stop the vehicle, switch off the igni-
tion, and start it again.
–
Read out the ABS fault memory using
the Husqvarna Motorcycles diagnos-
tics tool.
–
Route the vent hose without bends or
change it if necessary.
–
Check the engine oil level. (
p. 179)
p. 212)
Advertisement
Table of Contents
