Husqvarna 701 Supermoto Owner's Manual page 160

14 WHEELS, TIRES
158
–
Clean and grease the thread of the wheel spindle and nut
Long-life grease (
–
Clean and grease the wheel spindle.
Long-life grease (
–
Mount the rubber damper and rear sprocket carrier in the rear
wheel.
–
Position the rear wheel.
The brake linings are correctly positioned.
–
Push the rear wheel forward as far as possible and lay the
chain on the rear sprocket.
–
Mount wheel spindle
2
nut , but do not tighten it yet.
–
Make sure that chain adjusters
adjusting screws
Guideline
In order for the rear wheel to be correctly aligned, the
markings on the left and right chain adjusters must be in
S01005-10
the same position relative to reference markings
Info
Mount left and right chain adjusters
position.
p. 260)
p. 260)
3 4
and chain adjuster
4
are fitted correctly on
5
.
4
2
.
. Mount
B
.
in the same