Preparing For Use After Storage - Husqvarna 701 Supermoto Owner's Manual

20.2

Preparing for use after storage

–
Raise the motorcycle with the rear lifting gear. (
–
Lift the motorcycle with the front lifting gear. (
–
Cover the vehicle with a tarp or similar cover that is perme-
able to air.
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since
the engine cannot warm up properly, the water vapor
produced during combustion condenses and causes
valves and the exhaust system to rust.
–
Take the motorcycle off the front lifting gear. (
–
Remove the rear of the motorcycle from the wheel stand.
( p. 97)
–
Install the battery.
–
Adjust the clock. (
–
Perform checks and maintenance measures when preparing
for use. ( p. 58)
–
Take a test ride.
401059-01
p. 98)
p. 99)
( p. 172)
p. 46)
STORAGE 20
p. 97)
231