Table of Contents
Advertisement
9 RIDING INSTRUCTIONS
Note
Engine failure Overheating damages the engine.
–
If the coolant temperature warning is displayed, stop immediately and take care not to endanger yourself or
other traffic participants in the process.
–
Allow the engine and cooling system to cool down.
–
Check and, if necessary, correct the coolant level on the cooling system while it is in a cooled state.
66
Info
If unusual noises occur during operation, stop immediately, switch off the engine, park the vehicle prop-
erly, and contact an authorized Husqvarna Motorcycles workshop.
401950-11
–
Shift into a higher gear when conditions allow (incline, road
situation, etc.).
–
Release the throttle while simultaneously pulling the clutch
lever, shift into the next gear, release the clutch lever, and
open the throttle.
Info
You can see the positions of the 6 forward gears in
the figure. The neutral or idle position is between the
first and second gears.
First gear is used for starting off or for steep inclines.
–
After reaching maximum speed by fully opening the throt-
tle grip, turn the throttle back so it is ¾ open. This will barely
Advertisement
Table of Contents
