Changing The Main Fuse (Te 150 Us) - Husqvarna TX 125 Owner's Manual

15 ELECTRICAL SYSTEM
15.4
106

Changing the main fuse (TE 150 US)

Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle.
S01345-10
Info
If the charging current or charging voltage are
exceeded, the battery will be destroyed.
If the battery is left in a discharged state
for an extended period, it will become
over-discharged and sulfated, destroying the
battery.
The battery is maintenance-free.
Never remove cover
–
Switch off the battery charger after charging and disconnect
from the battery.
Finishing work
–
Install the battery. (
–
Mount the seat. ( p. 66)
–
Install the air filter box cover. (
Preparatory work
–
Press and hold the kill switch
the engine stops.
–
Remove the air filter box cover. (
–
Remove the seat. ( p. 65)
Main work
–
1
Pull starter relay from the holder.
1
.
p. 104)
p. 67)
while the engine is idling until
p. 66)