Husqvarna TX 125 Owner's Manual page 60

12 SERVICE WORK ON THE CHASSIS
58
–
Position the fork legs.
Bleeder screws
Info
The rebound damping is located in the right fork leg
(red adjusting screw). The compression damping is
located in the left fork leg (white adjusting screw).
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
402556-12
must be flush with the top edge of the upper triple
clamp.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
V01006-10
–
Tighten screw
Guideline
Screw, top steering
head
V00990-10
–
Mount and tighten screw
Guideline
Screw, top
steering stem
V00991-10
–
Tighten screws
Guideline
Screw, top triple
clamp
V01006-11
7
are positioned toward the front.
8
.
M8 15 Nm (11.1 lbf ft)
4
.
M20x1.5 12 Nm (8.9 lbf ft)
9 .
M8 17 Nm (12.5 lbf ft)
bk
.
M8 17 Nm (12.5 lbf ft)
®
Loctite 243™