Removing The Fork Protector; Installing The Fork Protector; Removing The Lower Triple Clamp - Husqvarna TX 125 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.7
12.8
12.9
56

Removing the fork protector

V00903-10

Installing the fork protector

V00903-11

Removing the lower triple clamp

V00988-10
–
1
Remove screws and take off the clamp.
–
2
Remove screws and take off the left fork protector.
–
Remove screws 3 and take off the right fork protector.
–
Position the fork protector on the left fork leg. Mount and
tighten screws 1 .
Guideline
Remaining screws,
chassis
–
Position the brake line, wiring harness, and clamp. Mount and
2
tighten screws .
–
Position the fork protector on the right fork leg. Mount and
3
tighten screws .
Guideline
Remaining screws,
chassis
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove front fender. (
Main work
–
1
Remove screw .
–
2
Remove screw .
–
3
Open cable holder in front of the left radiator and detach
the clutch line.
–
4
Open cable holder in front of the right radiator and detach
the wiring harness.
–
Remove the upper triple clamp with the handlebar and set
aside.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 107)
p. 53)
( p. 97)
( p. 54)
p. 61)