Installing The Shock Absorber - Husqvarna TX 125 Owner's Manual

12.17

Installing the shock absorber

12 SERVICE WORK ON THE CHASSIS
–
Remove screws
–
Pull off foot brake cylinder from the push rod.
V00941-10
–
Remove the connecting link of the chain.
–
Take off the chain.
V00942-01
–
8
Remove nut
–
Push the swingarm back and secure it against falling over.
V01008-10
–
Hold the shock absorber and remove screw
–
Remove the shock absorber carefully at the bottom.
V00398-11
Main work
–
Carefully position the shock absorber into the vehicle from
the bottom.
–
Mount and tighten screw
Guideline
Screw, top
shock absorber
V00399-10
7
.
and pull out the swingarm pivot.
9
1
.
M10 60 Nm (44.3 lbf ft)
.
®
Loctite 2701™
63