12 SERVICE WORK ON THE CHASSIS
64
–
Position the swingarm and mount the swingarm pivot.
Info
Pay attention to flat area
–
Mount and tighten nut
Guideline
Nut, swingarm pivot
V00400-10
–
Mount the chain.
–
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
V00942-10
(TX 125 EU)
–
Join the plug-in connector.
–
Fit the new rubber band and cable tie.
V01009-10
–
Position the foot brake cylinder.
Push rod
The dust boot is correctly positioned.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
V00947-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
F00284-11
–
Mount and tighten screw
A
.
2
.
M16x1.5
100 Nm (73.8 lbf ft)
3
4
engages in the foot brake cylinder.
5
.
M6
10 Nm (7.4 lbf ft)
6
.
M14x1.5
80 Nm (59 lbf ft)
B
.
7
.
.