Installing The Lower Triple Clamp - Husqvarna TX 125 Owner's Manual

12.10

Installing the lower triple clamp

12 SERVICE WORK ON THE CHASSIS
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
–
Remove O-ring
–
Take out the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.
E00418-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
the upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Mount protective ring
B01632-10
–
Position the upper triple clamp with the handlebar.
–
Mount screw
–
Mount the clutch line with cable holder
–
Mount the wiring harness with cable holder
V00989-10
5
. Remove protective ring
p. 152)
1
2 3
and O-ring .
4
but do not tighten yet.
5
6
.
is correctly posi-
.
6
.
57