13.11
Checking the brake linings of the rear brake
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized Husqvarna Motorcy-
cles workshop will be glad to help.)
13.12
Changing the rear brake linings
Warning
Danger of accidents Incorrect maintenance will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized Husqvarna
Motorcycles workshop will be glad to help.)
Main work
–
Stand the vehicle upright.
–
Remove the cable ties on the frame protector.
–
Remove screw cap
–
Add brake fluid to marking
Brake fluid DOT 4 (
–
Mount and tighten screw cap with the membrane and the
shim.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
–
Mount new cable ties on the frame protector.
K00946-10
–
Check the brake linings for minimum thickness
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the rear brake linings.
–
Check the brake linings for damage and cracking.
»
If damage or wear is encountered:
–
Change the rear brake linings.
V00917-10
13 BRAKE SYSTEM
1
2
with membrane
and the shim.
A
.
p. 150)
A
≥ 1 mm (≥ 0.04 in)
A
(
p. 93)
(
p. 93)
.
93