11 SERVICE WORK ON THE CHASSIS
11.7
11.8
11.9
48
Removing the fork protector
A00140-10
Installing the fork protector
A00141-10
Removing the lower triple clamp
A00145-10
–
1
Remove screws
and take off the clamp.
–
2
Remove screws
on the left fork leg. Take off the fork pro-
tector.
–
3
Remove screws
on the right fork leg. Take off the fork
protector.
–
Position the fork protector on the right fork leg. Mount and
tighten screws
1
.
Guideline
Remaining screws,
chassis
–
Position the fork protector on the left fork leg. Mount and
2
tighten screws
.
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
3
screws
.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove front fender. (
–
Remove the handlebar cushion.
Main work
–
1
Pull fuel tank breather
–
2
Loosen screw
. Remove nut
clamp with the handlebar in an upward direction, and hang it
to the side.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 45)
(
p. 84)
(
p. 46)
p. 52)
p. 53)
out of the steering stem.
3
, pull off the upper triple