Checking The Basic Setting Of The Fork; Adjusting The Fork Air Pressure - Husqvarna TC 85 Owner's Manual

10.12

Checking the basic setting of the fork

Info
For various reasons, no exact riding sag can be determined for the fork.
10.13

Adjusting the fork air pressure

Warning
Danger of accidents Modifications to the suspension setting may seriously alter the handling charac-
teristic.
Extreme modifications to the suspension setting may cause a serious deterioration in the handling
characteristic and overload components.
–
Only make adjustments within the recommended range.
–
Make sure your child rides slowly to start with after making adjustments in order that he or she can
assess the new handling characteristic.
Info
Check or adjust the air pressure under the same conditions at the earliest 5 minutes after switching off
the engine.
The air suspension is located in the left fork leg. The rebound damping is located in the right fork leg.
–
Check the static sag of the shock absorber. (
–
Check the riding sag of the shock absorber. (
–
Adjust the rebound damping of the shock absorber. (
–
Smaller differences in the rider's weight can be compensated
for by the fork air pressure.
–
However, if the fork frequently bottoms out (hard end stop on
compression), the fork air pressure must be increased, within
the specified values, to avoid damage to the fork and frame.
401000-01
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove protection cap
–
Push fork pump
Fork pump (79412966000)
Info
The fork pump is included as part of the motorcycle's
separate enclosure.
K00961-10
–
Connect the fork pump to the left fork leg.
The fork pump indicator switches on automatically.
10 TUNING THE CHASSIS
p. 45)
1
.
2
together fully.
p. 38)
p. 39)
p. 37)
41