9 SERVICE SCHEDULE
Service the shock absorber.
Check the screws and nuts for tightness.
Check idle.
Final check: Check the vehicle for operating safety and take a test ride.
Make the service entry in the Husqvarna Motorcycles Dealer.net and in the Service and
Warranty Booklet.
○
One-time interval
●
Periodic interval
9.3
Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Grease the steering head bearing.
Service the fork.
Service the shock absorber.
Check/adjust the carburetor components.
Perform minor engine service. (Check the inlet membrane. Check the clutch. Change
the piston under difficult operating conditions. Check the cylinder and Z dimension.)
Perform the intermediate engine service. (Change the piston. Check the cylinder and Z
dimension. Check the exhaust control for functioning and smooth operation.)
Perform major engine service including removing and installing engine. (Change the
connecting rod, conrod bearing, and crank pin. Check the transmission and shift
mechanism. Change all engine bearings.)
○
One-time interval
●
Periodic interval
34
Recommended work
Once after 20 operating hours / Every 20 operating hours
Once after 10 operating hours / Every 10 operating hours
(
(
Once after 10 operating hours
p. 70)
p. 52)
after every race
Every 40 operating hours
Every 20 operating hours
○
●
○
●
○
●
○
●
after every race
Annually
Every 40 operating hours
○
○
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●