Installing The Rear Wheel - Husqvarna TC 85 Owner's Manual

13 WHEELS, TIRES
13.4
86
H02529-12
H00936-10

Installing the rear wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
H00937-10
Main work
–
1
Remove nut .
–
Remove chain adjuster 2
enough to allow the rear wheel to be pushed forward.
–
Push the rear wheel forward as far as possible. Remove the
chain from the rear sprocket.
Info
Cover the components to protect them against dam-
age.
Warning
Danger of accidents Damaged brake discs reduce
the braking effect.
–
Always lay the wheel down in such a way that the
brake disc is not damaged.
–
Holding the rear wheel, withdraw the wheel spindle. Take the
rear wheel out of the swingarm.
Info
Do not operate the foot brake lever when the rear
wheel is removed.
–
4
Remove spacers .
Main work
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Clean and grease shaft seal rings
of the spacers.
Long-life grease ( p. 123)
–
Insert the spacers.
. Pull out wheel spindle 3 far
1
and contact surface
A