11.10
Installing the lower triple clamp
11 SERVICE WORK ON THE CHASSIS
–
Remove protective ring
–
Take off the lower triple clamp with the steering stem in a
downward direction.
–
Remove the upper steering head bearing.
A00146-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
the upper steering head bearing.
–
Slide on O-ring
–
Position protective ring
V00859-10
–
Position the upper triple clamp with the handlebar.
–
3
Mount nut
A00147-10
4
.
p. 123)
1
.
2
.
, but do not tighten it yet.
49