Checking The Frame; Checking The Swingarm; Checking The Throttle Cable Routing - Husqvarna TC 85 Owner's Manual

11.39

Checking the frame

11.40

Checking the swingarm

11.41

Checking the throttle cable routing

Warning
Danger of accidents The throttle cable may slip out of the guide if routed incorrectly.
The throttle slide will then no longer be closed and the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specifica-
tion.
11 SERVICE WORK ON THE CHASSIS
–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining
screws, chassis
Remaining nuts,
chassis
H02532-01
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for cracks and deformation.
» If the frame exhibits cracks or deformation due to a
mechanical impact:
–
Change the frame.
V00858-01
–
Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or
deformation:
–
Change the swingarm.
V00857-01
Preparatory work
–
Remove the seat. (
–
Remove the air filter box cover. (
–
Remove the right side cover. (
M6
M6
Info
Always replace a frame that has been
damaged due to a mechanical impact. Repair
of the frame is not authorized by Husqvarna
Motorcycles.
Info
Always change a damaged swingarm. Repair
of the swingarm is not authorized by Husq-
varna Motorcycles.
p. 55)
p. 55)
p. 59)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
p. 45)
67