11 SERVICE WORK ON THE CHASSIS
11.17
11.18
11.19
54
Installing front fender
A00138-10
Removing the shock absorber
K00978-10
Installing the shock absorber
K00978-11
Main work
–
Position front fender.
–
Mount and tighten screws
Guideline
Screw, front fender
–
Mount and tighten screws
Guideline
Screw, front fender
Finishing work
–
Install the start number plate. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Detach brake line from the brake line guide.
–
1
Remove screw
and lower the rear wheel with the
swingarm as far as possible without blocking the rear wheel.
Secure the rear wheel in this position.
–
2
Remove screw
, push splash protector
and remove the shock absorber.
Main work
–
1
Push splash protector
absorber. Mount and tighten screw
Guideline
Screw, top
M12
shock absorber
–
Mount and tighten screw
Guideline
Screw, bottom
M12
shock absorber
–
Attach brake line.
1
.
M6
10 Nm (7.4 lbf ft)
2
.
M6
10 Nm (7.4 lbf ft)
p. 53)
p. 45)
3
to the side,
to the side and position the shock
2
.
60 Nm (44.3 lbf ft)
®
Loctite
3
.
60 Nm (44.3 lbf ft)
®
Loctite
2701™
2701™