10 TUNING THE CHASSIS
10.14
42
Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
V00823-10
A little air escapes from the fork leg when connecting.
Info
This is due to the volume of the hose and not due to a
defect in the fork pump or the fork.
Read the accompanying instructions for
Husqvarna Motorcycles accessories.
–
Adjust the air pressure as specified.
Guideline
Air pressure
Changing of the air pressure
in steps of
Minimum air pressure
Maximum air pressure
Info
Never set the air pressure to a value outside the
stated range.
–
Disconnect the fork pump from the left fork leg.
When disconnecting, excess pressure will escape from
the hose – the fork leg does not lose any air.
The fork pump indicator switches off automatically after
80 seconds.
–
Mount the protection cap.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Remove protection cap
–
2
Turn adjusting screw
Info
The adjusting screw
the right fork leg.
–
Turn counterclockwise by the number of clicks correspond-
ing to the fork type.
Guideline
Compression damping
Comfort
Standard
Sport
5 bar (73 psi)
0.2 bar (3 psi)
4 bar (58 psi)
8 bar (116 psi)
p. 45)
.
clockwise all the way.
2
is located at the lower end of
17 clicks
12 clicks
7 clicks