Checking The Rear Brake Linings; Changing The Rear Brake Linings - Husqvarna FE 350 EU 2020 Owner's Manual

13.11

Checking the rear brake linings

Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized Husqvarna Motorcy-
cles workshop will be glad to help.)
13.12

Changing the rear brake linings

Warning
Danger of accidents Incorrect servicing will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized Husqvarna
Motorcycles workshop will be glad to help.)
Main work
–
Stand the vehicle upright.
–
Remove the cable ties on the frame protector.
–
Remove screw cap
–
Add brake fluid up to the marking
Brake fluid DOT 4 / DOT 5.1 (
–
Mount and tighten screw cap with the membrane and the
shim.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
–
Mount new cable ties on the frame protector.
H03724-10
–
Check the brake linings for minimum thickness
Minimum thickness
» If the minimum thickness is less than specified:
–
Change the rear brake linings.
–
Check the brake linings for damage and cracking.
» If damage or cracking is visible:
–
Change the rear brake linings.
H02368-10
BRAKE SYSTEM 13
1 2
with membrane and the shim.
A
.
p. 152)
A
≥ 1 mm (≥ 0.04 in)
A
( p. 97)
( p. 97)
.
97